EGD series

General-purpose equipment dryer: Efficiently dries in limited space.

A vertical blower dryer for drying various appliances after washing.

Warm air at room temperature ＋5℃〜100℃ is circulated into the tank and can be used to remove moisture from glassware, metalware, laboratory equipment, containers, trays, racks, etc.

It employs a vertical structure that can accommodate many instruments even in limited installation space, and can handle the drying process in various locations such as research facilities, laboratories, manufacturing sites, washing rooms, and preparation rooms.

inquiry

Easy to use and simple appliance dryer

A vertical structure that makes it easy to secure storage space in a limited space.
The simple design of the control system eliminates the need for a cleaning room, preparation room, laboratory, or laboratory.
Available in three sizes: 270L, 480L, and 720L.

Observation window is standard equipment

A large observation window is standard equipment that allows you to check the inside of the tank while driving.
You can check the dryness and placement of storage items without opening the door.

Fixed-value operation and programmed operation

In addition to fixed-value operation, it also comes with a program operation function with up to 8 steps.
By gradually increasing the temperature to the set temperature through program operation, "slow drying" becomes possible.

Examples of use

  • Drying of laboratory and glassware
  • Drying of metal tools and trays
  • Drying of heat-sensitive resin containers and storage cases
  • Drying of medical equipment, etc

Simple Is Best

Its simple, simple, and robust construction makes it unsuitable for general-purpose equipment dryers. The temperature controller can also be operated independently and can be used by anyone from the day it is left stationary.

The temperature setting range is set to room temperature ＋5～100℃, so even items that do not have strong heat resistance can be dried without worry.

The hot air is a crosswind circulation system that flows from left to right inside the tank, and is not affected by obstructing airflow caused by trays or other devices.

Easy switching: Fixed-value operation and programmed operation

You can easily switch from fixed-value operation to programmed operation with a maximum temperature and time setting of 8 steps.

Programmed operation can be used for multiple purposes, such as processing a set temperature and time in one step, or when you want to heat up in stages.

Preventing forgetting to stop driving
80℃, 7 hours, 1-step programmed operation that starts when you arrive at work and automatically completes operation when you finish work, so you don't waste power even if you forget to press stop.

Drying of crops
Rapid drying of crops can cause cracking, peeling, and uneven drying.
Therefore, it needs to be dried over a sufficient amount of time.
By performing a "programmed operation" that gradually increases the set temperature in several steps, it becomes possible to dry slowly, ensuring stable drying without compromising quality.

Observation window is standard equipment

A large observation window is standard equipment that allows you to check the inside of the tank while driving.
You can check the dryness and placement of storage items without opening the door.

EGD-270 EGD-480 EGD-720
Tank dimensions W×D×H(mm) 450×500×1200 800×500×1200 1000×600×1200
Tank internal volume (L) 270 480 720
External dimensions W×D×H(mm) 560×690×1770 920×690×1770 1120×840×1770
Weight (kg) 120 150 230
Operating temperature (℃) Room temperature ＋5 – 100
Required power supply AC200V, single phase, 30A or higher
Number of shelves (load capacity) 4 pieces (15kg/piece) 4 pieces (30kg/piece)

Temperature overflow prevention device

Two anti-over-the-top devices prevent accidents.

  • If the tank temperature becomes abnormal, an alarm will sound and the operation will stop.
  • If the temperature regulator fails and becomes uncontrollable, an independent anti-overrise device separate from the control circuit will activate and an alarm will sound to stop operation.

Sensor break detection

An alarm will sound and stop operation if the temperature sensor fails.
Instruments crucial for temperature control prevent equipment from running out of control.

Heater break detection

An alarm will sound and stop operation when the current level drops due to a broken heater or other reason.

Fan motor malfunction

If a malfunction occurs in the blower motor, the motor and temperature control will stop and the heater circuit will be shut off, preventing the risk of fire and other hazards.

Ground fault breaker

Senses a power leakage in the equipment and turns off the main power supply.
The electrical circuit is shut off, preventing the user from being electrocuted.

Why ESTERI?

Sterilization fast, easy, and reliable
Supporting essential hygiene practices in food and medical care
Japan's first sterilizer manufacturer

Over 50 years of experience

Sterilization technology in the laboratory and medical fields that has been developed since 1976

Quality based on international standards

"Manufacturing" that does not depend on individual abilities

Meeting customer needs

Flexible, custom-made solutions tailored to individual needs

To over 80 countries worldwide

Global brand of compact autoclaves

International standards certification obtained
about us

Having trouble choosing a product?

Please feel free to share any problems or questions you may have.

For inquiries, please click here