ECO Series
High temperature processing possible in a clean environment
In life sciences, where high quality is required, and in the field of chemical analysis, even a small amount of contact has a significant impact on quality and test reliability.
The ECO series uses high-performance HEPA filters to achieve heat treatment in a clean environment, minimizing the risk of contamination.
Furthermore, it boasts excellent heat treatment performance, supporting temperatures up to 300℃, and its applications extend beyond dry heat sterilization.
It is suitable for a wide range of applications, including pyrogen-free, annealing of resin and aluminum die-cast products, and drying in the semiconductor field.
Equipped with HEPA filter
Are tiny contaminants during processing affecting the analysis results?
In high-temperature environments, even small amounts of suspended particles or re-adhesive contact will affect the results.
Especially in cleanrooms, it is essential to design the equipment itself so that it does not become a “source of contamination”.
The ECO series is equipped with high-performance HEPA filters and maintains an internal grade A (ISO class 5) equivalent.
Maintaining a stable cleanliness during processing reduces disturbances and supports a highly reproducible process.
Temperature gradient control
Changes in heating time due to differences in processing volume can lead to variations in quality.
The heating speed is precisely controlled to suppress heat shock caused by sudden temperature changes.
Furthermore, a stable temperature rise profile enhances reproducibility and contributes to uniformity of quality.
No gradient control
Gradient control available
| ECO-360 | ECO-480 | ECO-600 | |
| In-tank dimensions (W×D×H mm) | 600×500×1200 | 800×500×1200 | 1000×500×1200 |
| Tank internal volume (L) | 360 | 480 | 600 |
| External dimensions (W×D×H mm) | 840×1140×1990 | 1040×1140×1990 | 1240×1140×1990 |
| Weight (kg) | 330 | 390 | 460 |
| Operating temperature (℃) | Room temperature +50 – 300 (common to all models) | ||
| Required power supply | AC200V, three-phase, 40A or higher | AC200V, three-phase, 50A or more | |
| Number of shelves (load capacity) | 3 pieces (15kg/piece) | 3 pieces (30kg/piece) | |
Temperature overflow prevention device
The temperature indicator regulator monitors the temperature inside the storage unit and automatically shuts it down if it becomes abnormally high, protecting the samples inside the storage unit.
Independent anti-over-the-top device
In the unlikely event that the device becomes uncontrollable, it will automatically shut down once the set temperature is reached, ensuring the user's safety from the risk of fire or other hazards.
Door switch
If you open the door while driving, the heater circuit will automatically shut off.
We ensure the safety of workers and also take into consideration the installation environment by reducing the rise in room temperature.
Ground fault breaker
Senses a power leakage in the equipment and turns off the main power supply.
The electrical circuit is shut off, preventing the user from being electrocuted.
Sensor anomaly detection
An alarm will sound and stop operation if the temperature sensor fails.
Instruments crucial for temperature control prevent equipment from running out of control.
Heater room over-rise prevention device
An alarm will sound and stop operation when the current level drops due to a broken heater or other reason.
Fan motor malfunction
If a malfunction occurs in the blower motor, the motor and temperature control will stop and the heater circuit will be shut off, preventing the risk of fire and other hazards.
In-board thermostat
Operates when the temperature inside the switchboard rises abnormally
It protects the electrical components of the device from heat.
This prevents damage and improves long-term device reliability.
Recording meters and temperature monitoring sensors
GMP requires reliable temperature monitoring and recording of the sterilization process.
ESTERI supports the addition of recorders and temperature sensors, allowing for constant monitoring and recording of the interior temperature.
By accurately understanding driving conditions and obtaining highly reliable data, we contribute to strengthening quality control.
Added indicator light
Even if you are far away, you can still see the status of the device at a glance.
Adding indicator lights helps ensure smooth operation.
Unpainted finish
When installing in a cleanroom, it is important to reduce dust generation from the equipment.
ESTERI supports unpainted stainless steel finishes, minimizing the generation of paint-related contact elements.
It contributes to ensuring high cleanliness in accordance with the level of a clean environment.
Why ESTERI?
Sterilization fast, easy, and reliable
Supporting essential hygiene practices in food and medical care
Japan's first sterilizer manufacturer
Sterilization technology in the laboratory and medical fields that has been developed since 1976
"Manufacturing" that does not depend on individual abilities
Flexible, custom-made solutions tailored to individual needs
Global brand of compact autoclaves
International standards certification obtained
Having trouble choosing a product?
Please feel free to share any problems or questions you may have.